On this page you’ll find all the necessary informations to setup your AXOCTRL with Axoloti Patcher software.
Coding is not required.
Tools and demo Patches
To simplify your first steps with Axoctrl we developed a series of tools and preconfigured patches that will help you to design quickly your idea. Download here the package and follow the instructions to configure properly your library on Axoloti Patcher.
1. Download and Install Axoloti Patcher - You can download it here
2. Download the Axoctrl package - Save the Axoctrl folder in your documents
3. Open Axoloti patcher and go to File > Preferences
4. Click on the "+" to add a new library
5. Write "Axoctrl" in the ID field
6. In "Directory" Select the Axoctrl folder saved previously in your documents
7. Click ok to confirm and save your preferences
8. Go to File > Reload objects to sync up the libraries
9. Now you can go to File > Library and you'll see the folder with all the utilities
Tools are sub-patches with preconfigured connections and functionalities appositely made for Axoctrl. To import a sub-patch into your patch, select one of them from your library or just drag & drop it from the Axoctrl package. Then, you can connect the knobs, the buttons and the lights as you prefer.
In the package you'll find the following tools:
Use this module to get immediate access to all the controls available on the board without pre-configured functions. You can setup up to 9 knobs, 4 buttons, 2 I/O PWM, and 3 lights (1xPWM).
2. Axoctrl_switch and switcher
Include and connect these modules if you want to navigate your patch bank. Connect NEXT and PREVIOUS to button #5 and #4.
Use this module to setup your display on Axoctrl. Connect a "string object" with only text to show the actual patch name. Link the audio out of your patch to OSC SCOPE to show up the spectre of your sound. Combine this module with Axoctrl_lfo to show LFO settings such selected mode and waveform.
It's a fully preconfigured LFO with three waveform (square, triangle, sine) and sync mode. Connect buttons to switch between waveforms and modalities or to multiply and divide the tempo when you're in sync mode. Connect two knobs to control Time (free mode) Phase (sync mode) or to smooth the LFO wave shape.
Note: Combine this module with Axoctrl_button to design your custom shortcuts and use less buttons.
Get twice the buttons on your Axoctrl and design your custom shortcuts adding the press & hold function.
Use this object to send audio out from your patch. Connect an LFO signal to use it as VCA. Link one of the knobs to the VOL parameter to adjust the output level. Link the red output source to the display scope to show the signal on the display.
It's a preconfigured solution that contains all the previous modules. Using this sub-patch you'll add some extra features to your patch such the LFO and the display informations. Connect a "string object" with only text to show the actual patch name. Connect the MIDI gate to bright up the yellow led when Axoloti is receiving MIDI messages. Send the audio output of your patch to OUT_L/OUT_R. Grab the incoming audio signals from IN_L/IN_R. Set up as you prefer the blue button (#6) and the remaining knobs.
Features and pre-configurations.
1. LFO * modulating the output VCA
- Tap the grey button to choose a waveform (off-sine-triangle-square)
- Hold 2s the grey button to switch between Free and Sync mode (MIDI sync)
- Use PC4 (#14) to adjust the frequency in Free mode or the phase in Sync mode
- Use PA2 (#15) to smooth wave shape
- Use PA0 (#16) to adjust the mix intensity
- When you are in Sync Mode tap on PB6 (#4) and PB7 (#5) to divide or multiply the sync time.
Hold 2s the white buttons PB6 (#4) and PB7 (#5) to scroll your patch bank and load your patches from the SD-card. If you don't know how to setup a patch bank please see the instructions in the next section.
The display will show the patch name, the audio scope, LFO informations such waveform and modality.
In the Axoctrl library you'll also find some demo-patches that will help you to configure properly your Axoloti and your Patch Bank. Follow the instructions below to see how to do it:
1. Design your patches using the Axoctrl module
2. Save your patches in a folder.
3. Open and run "live" the Axoctrl patch "format_flash_disk.axp" to clean up your SD-card
4. Open the Axoctrl patch "startup_patch.axp" and load it to your Axoloti as startup patch: Patch>Upload to SDCard as startup
5. Make a new patch bank: File>New patch bank
6. Click on "Add" to load your saved patches in the patch bank.
7. Click on 'Upload patch bank" to complete the process and move your files to Axoloti.
Now you can use Axoloti stand alone and navigate your patches.